Bifurcation and universal unfolding for a rotating shaft with unsymmetrical stiffness

The 1/2 subharmonic resonance bifurcation and universal unfolding are studied for a rotating shaft with unsymmetrical stiffness. The bifurcation behavior of the response amplitude with respect to the detuning parameter was studied for this class of problems by Xiao et al. Obviously, it is highly important to research the bifurcation behavior of the response amplitude with respect to the unsymmetry of stiffness for this problem. Here, by means of the singularity theory, the bifurcation and universal unfolding of amplitude with respect to the unsymmetrical stiffness parameter are discussed. The results indicate that it is a high codimensional bifurcation problem with codimension 5, and the universal unfolding is given. From the mechanical background, we study four forms of two parameter unfoldings contained in the universal unfolding. The transition sets in the parameter plane and the bifurcation diagrams are plotted. The results obtained in this paper show rich bifurcation phenomena and provide some guidance for the analysis and design of dynamic buckling experiments of this class of system, especially, for the choice of system parameters. The project supported by the National Natural Science Foundation of China (19990510), the National Key Basic Research Special Foundation (G1998020316) and Liuhui Center for Applied Mathematics, Nankai University and Tianjin University     

非半单分叉的Normal Form计算

在文［１］基础上，提出一种仅知道派生线性系统零实部特征值时求解非线性系统非半单分叉ＮｏｒｍａｌＦｏｒｍ的方法．通过适当的分类，将要求解的线性代数方程组分为若干相互独立的方程组．将所求系数向量按字典序列排列后，各独立方程组的系数矩阵是上三角矩阵．在非共振情形，各系数向量可按反字典序列递推求出．在共振情形，根据文中的二个定理，巧妙地由一简单的常数矩阵的最大秩子矩阵，定位其系数矩阵的满秩子矩阵，解决了这类方程组的降维简化．通过消元法，把简化后的方程化成类似于半单分叉ＮｏｒｍａｌＦｏｒｍ求解过程中方程的形式，其解法也类似．该方法非常易于在计算机代数软件平台上程序化．     

基于振动监测的静载荷滑动轴承接触摩擦故障诊断实验研究

采用静载荷滑动轴承试验台模拟轴颈-轴承从液体润滑状态逐步向干摩擦状态过渡时的接触摩擦故障的发生和发展过程,进而利用振动信号诊断滑动轴承的接触摩擦故障;通过对特征参数进行归一化处理得到无量纲特征参数,进而通过无量纲特征参数的适当数学组合得到无量纲诊断准则,并探讨了无量纲诊断准则的适用性.结果表明:利用所得到的无量纲诊断准则进行轴颈-轴承接触摩擦故障诊断时无须建立用于模式识别的标准模,可实现快捷方便的故障诊断;无量纲诊断准则对工况不敏感,而对故障更敏感,适用于可变工况下滑动轴承的故障诊断,且诊断成本较低.     

黑龙江省的界河坍塌地质灾害及其防治对策

界河坍塌是黑龙江省特殊的、主要的地质灾害,也是当前亟待解决的问题。本文总结了黑龙江省的两条主要界河—黑龙江和乌苏里江的塌岸状况;说明了界河坍塌的分布规律;论证了界河坍塌的形态类型;探讨了界河坍塌的形成机制;分析了界河坍塌的原因;最后提出了防止界河坍塌的一系列对策。     

铁路车辆/轨道耦合系统在竖向冲击载荷作用下动态响应的计算机模拟研究

车辆与轨道的动态相互作用,是铁路轮轨接触式运输系统中最基本的问题之一,它直接制约着铁路运营速度的提高和运载重量的增加,也影响着铁路安全运行。本文采用有限元方法,对我国C61型运煤货车,按照车辆/轨道系统的实际几何形状、材料性质和边界条件建立了包括车辆和轨道系统的有限元模型,应用大型非线性动力分析程序LS-DYNA3D来模拟车辆通过轨道错牙接头时的轮/轨动态响应过程。计算结果表明车轮和轨道之间的竖向动态接触力大约是静轮载的2倍,与已有的现场试验结果基本吻合。因此应用有限元方法研究车辆/轨道耦合系统是可行和可靠的。     

甘肃引洮供水工程饱和黄土隧洞施工方法选择的工程地质研究

甘肃引洮供水一期工程总干渠13#、14#、15#隧洞围岩为al-lQ2饱和黄土,地下水位高于洞顶4³7m,饱和度一般在98%¹00%,水稳性很差。因此,该段隧洞施工方法的选择十分重要,从工程地质角度研究其工程特性,采用D rucker-Prager弹塑性模型、关联流动法则,模拟了传统钻爆法开挖时隧洞稳定性,计算表明,若采用钻爆法,由于围岩的岩性软弱,隧洞开挖后,在隧洞周围较大范围内存在应力降低区,隧洞位移十分迅速而且位移量非常大,洞顶下降发生塌方并引起地面沉降。从盾构法施工对地质条件的适应性分析,其施工风险相对较小,施工过程中可利用护盾很快封闭围岩,因此该段隧洞宜采用盾构法施工。     

多自由度内共振系统非线性模态的分岔特性

利用多尺度法构造了一个立方非线性1:3内共振系统的内共振非线性模态(NonlinearNormal Modes associated with internal resonance)．研究表明,内共振非线性系统除存在单模态运动外还存在耦合模态运动．耦合内共振模态具有分岔特性．利用奇异性理论对模态分岔方程进行分析发现此类系统的模态存在叉形点分岔和滞后点分岔这两种典型的分岔模式．     

Bayesian Estimation and Statistical Analysis of Risk Measurements

The Bayesian model are established for the VaR and related risk measurements. The relationship between VaR and other risk measurements including expect shortfall, tail condition expectation and conditional value at risk are discussed. Furthermore, the Bayesian estimates and Bayesian predictors of these risk measurement are derived. Thirdly, the consistency and asymptotic normality in the exponential risk model are proved. Finally, the numerical simulation method is used to verify the convergence rate under different sample sizes.     

Recent Progress in the Electrolytes of Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc-ion batteries (ZIBs) have garnered tremendous attention in the field of next energy storage devices due to their high safety, low cost, abundant resources, and eco-friendliness. As an important component of the zinc-ion battery, the electrolyte plays a vital role in the electrochemical properties, since it will provide a pathway for the migrations of the zinc ions between the cathode and anode, and determine the ionic conductivity, electrochemically stable potential window, and reaction mechanism. In this Minireview, a brief introduction of electrochemical principles of the aqueous ZIBs is discussed and the recent advances of various aqueous electrolytes for ZIBs, including liquid, gel, and multifunctional hydrogel electrolytes are also summarized. Furthermore, the remaining challenges and future directions of electrolytes in aqueous ZIBs are also discussed, which could provide clues for the following development.     

Challenge and Solution of Characterizing Glass Transition Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers highly depend on their glass transition temperature (T _g). Differential scanning calorimetry (DSC) is commonly used to measure T _g of polymers. However, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T _g in such type of polymers. The changes in specific heat capacity (Δc _p) at T _g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δc _p from flexible polymer (0.28 J g^?1 K^?1 for polystyrene) to rigid CPs (10^?3 J g^?1 K^?1 for a naphthalene diimide‐based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δc _p at T _g by a factor of 10, confirming that backbone rigidity reduces the Δc _p. Additionally, an increase in the crystalline fraction of the CPs further reduces Δc _p. We conclude that the difficulties of determining T _g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D‐A CPs with weak transition signals. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1635–1644